Avaya Meetings Server dial-out information

Last Updated : Oct 27, 2020 |

Users can dial out of a conference in the following use cases:

  • Join a meeting in presentation-only mode by using a call back number.

  • Add a participant during the meeting by using a call back number. Only a moderator can do this.

The call back number can be an E.164 number, a terminal number, or a room system IP address.

Supported clients

  • Avaya Workplace Client on mobile platforms

  • Avaya Workplace Client on desktop platforms

  • Avaya Workplace Client conference portal

Supported servers

  • Avaya Meetings Server

  • Unified Portal

  • Avaya Aura® Web Gateway

For information about the minimum supported versions, use the Compatibility Matrix tool on the Avaya Support website at https://support.avaya.com/CompatibilityMatrix/Index.aspx.

Configuring the Avaya Equinox Management server for the Avaya Meetings Server dial-out information

Procedure

  • Configure the vnex.vcms.core.conference.defaultDomain parameter.

    • UC deployment: If the dial out calls need to be routed through Avaya Aura®, you can set the parameter to the Avaya Aura® SIP domain.

    • OTT deployment: If you are using the SIP server to dial out, you can set the parameter to the SIP server domain.

  • Configure the vnex.vcms.core.conference.enableDialoutAsSIP parameter.

    • UC deployment: If the dial out calls need to be routed through Avaya Aura®, you can set the parameter to True.

    • OTT deployment: If you are using the SIP server to dial out, you can set the parameter to True.

    • OTT deployment: If you are using the H.323 gateway to dial out, you can set the parameter to False.

  • Configure the com.vcms.conference.dialout.enabled parameter.

    • UC deployment: If you set this parameter to false, the conferencing server disallows any dial out.

    • OTT deployment: If you set this parameter to false, the conferencing server disallows any dial out.

To dial out, Avaya Equinox® Management must include minimum one configured outbound SIP server. The domain of the first outbound SIP server is the default domain.

  • If not configured, you can configure a policy for outbound SIP messaging in Settings > Meetings > Policies and select one of the SIP servers.

    The default is the first SIP server.