Entering the Radio Settings

About this task

Having been configured as the master base station, the radio aspect of the base station can be configured. Note that IP Office does not support use of a standby master base station.

Procedure

  1. In the left-hand panel select DECT. Select the Radio tab.


  2. Set the following values:
    • Name

      Set this to match the System Name set on the DECT | System tab.

    • Password

      Set this to match the Password set on the DECT | System tab.

    • Master IP Address

      Set the address 127.0.0.1 for the base station to refer to itself. (Alternatively set this to match the IP address assigned to the base station on the LAN | IP tab).

    • Click OK.
      • The message Reset required! is displayed. At this stage further changes are required so do not reset the base station.