Configuring Avaya SBC load monitoring

Last Updated : Oct 03, 2018 |

About this task

Perform this procedure if you are using external clients in your deployment.

Before you begin

Ensure that you have:

Procedure

  1. Log in to the Avaya SBC web administration portal.
  2. Navigate to Device Specific Settings > Advanced Options > Load Monitoring.
  3. Click Add to create a new monitoring profile.
  4. In Load Balancer Type, select INTERNAL.

    This is the load balancer on the A1 side of the network. Avaya Aura® Web Gateway performs load balancing towards the internal side. All HTTP requests sent for dialing out use the internal load balancer logic to identify the appropriate Avaya SBC.

  5. In Transport, select TLS.
  6. In TLS Profile, select the TLS server profile that you created.

    For more information, see the tasks outlined in Checklist for creation of a TLS server profile for a management interface.

  7. In Listen IP, select the internal A1 interface.

    To enable external WebRTC clients, the same interface must be configured for the TURN server as the A1 interface.

  8. In Service Type, select TURN.
  9. Click Finish.

Next Steps

Add Avaya SBC to the Avaya Aura® Web Gateway.