Configuring a TURN/STUN profile for WebRTC calls on Avaya Session Border Controller

Last Updated : Oct 04, 2018 |

Procedure

  1. Log in to the Avaya SBC web administration interface.
  2. Navigate to Device Specific Settings > TURN/STUN Service.
  3. From the Application pane, select the Avaya SBC device for which the new TURN/STUN profile will be created.
  4. Click TURN/STUN Profiles.
  5. Click Add.

    The system displays the Add TURN/STUN Profile window.

  6. In Profile Name, provide a name for the TURN/STUN profile.

    For example: turnProfileForWebrtcCalls.

  7. In UDP Listen Port, enter 3478.
  8. In TCP/TLS Listen Port, enter 443.
  9. If TLS TURN media is required, then in TLS Server Profile, specify the TLS server profile for a management interface that you created.

    For more information, see the tasks outlined in TLS server profile checklist for client side TURN configuration. An example of the TLS server profile name is turnmediaTlsProfile.

  10. In Media Relay Port Range, specify a range that does not overlap with the port range used by Avaya SBC for other protocols, such as SIP.

    The default range is 50000 to 55000.

  11. Select the Authentication check box.
  12. Select the Client Authentication check box.
  13. Select the UDP Relay check box.
  14. Click Finish.