Configuring Avaya Session Border Controller server flows

Last Updated : Oct 10, 2018 |

Before you begin

Ensure that you have the TLS client profile created when you configured a certificate authority for reverse proxy. For more information, see Certificate Authority configuration checklist. An example of the TLS client profile name is certficateAuthorityTlsProfile.

Procedure

  1. Log in to the Avaya SBC web administration portal.
  2. To create an interworking profile, do the following:
    1. Navigate to Global Profiles > Server Interworking and then select Add.
    2. For the new profile, use the default options for all settings.
    3. In the Advanced Options section, set Has Remote SBC to No (disabled).
  3. To add a configuration for Avaya Meetings Management, do the following:
    1. Navigate to Global Profiles > Server Configuration and then click Add.
    2. From Sever Type, select Trunk Server.
    3. Leave SIP domain blank.
    4. From TLS Client Profile, select the TLS client profile that you created when you configured a certificate authority for reverse proxy.
    5. Add the Avaya Meetings Management FQDN with port 5061 and the TLS protocol specified.
    6. In the Advanced Options section, select the Enable Grooming check box and then select the previously created interworking profile.
  4. To add a configuration for the Avaya Aura® Web Gateway, do the following:
    1. Navigate to Global Profiles > Server Configuration and then click Add.
    2. From Sever Type, select Trunk Server.
    3. Leave SIP domain blank.
    4. From TLS Client Profile, select the TLS client profile that you created when you configured a certificate authority for reverse proxy.
    5. Add the Avaya Aura® Web Gateway FQDN with port 5061 and TLS protocol specified.
    6. Repeat the previous substep for FQDNs of all Avaya Aura® Web Gateway nodes.
    7. In the Advanced Options section, select the Enable Grooming check box and then select the interworking profile created in the previous step.
  5. To add a flow for Avaya Meetings Management, do the following:
    1. Navigate to Device Specific Settings > End Point Flows > Server Flows and then select Add.
    2. In Flow Name, provide a name for the flow.

      For example: EqMngFlow.

    3. From Server Configuration, select the Avaya Meetings Management configuration that you created in step 3.
    4. From Received Interface, select the internal A1 interface.
    5. From Signaling Interface, select the internal A1 interface.
    6. From Media Interface, select the internal A1 interface.
    7. From End Point Policy Group, select required.
  6. To add a flow for the Avaya Aura® Web Gateway, do the following:
    1. Navigate to Device Specific Settings > End Point Flows > Server Flows and then select Add.
    2. In Flow Name, provide a name for the flow.

      For example: AAWGFlow.

    3. From Server Configuration, select the Avaya Aura® Web Gateway configuration that you created in step 4.
    4. From Received Interface, select the internal A1 interface.
    5. From Signaling Interface, select the internal A1 interface.
    6. From Media Interface, select the external B1 interface.
    7. From End Point Policy Group, select required.