Configuring external traffic rules in a multiple FQDN deployment

Last Updated : Oct 10, 2018 |

About this task

Perform this procedure for each service in your deployment. For example, if you have multiple Web Collaboration Services servers in your deployment, you must perform this procedure for each server.

Before you begin

Ensure that you have:

Procedure

  1. Log in to the Avaya SBC web administration portal.
  2. Navigate to Device Specific Settings > DMZ Services > Relay Services > Reverse Proxy.
  3. Click Add.
  4. In Service Name, enter a name for the profile.
  5. Select the Enable check box to enable the reverse proxy profile.
  6. In Listen IP, select the external B1 interface and the Avaya SBC external leg IP address.
  7. In Listen Port, enter 443.
  8. In Listen Protocol, select HTTPS.
  9. In Listen TLS Profile, select the TLS server profile that you created.

    An example of the TLS server profile name for Web Collaboration Services is webservicesTLSProfile.

  10. In Connect IP, select the internal interface A1 and the Avaya SBC internal leg IP address.
  11. In Server Protocol, select HTTPS.
  12. In Server TLS Profile, select the TLS client profile that you created.

    An example of the TLS client profile name is certificateAuthorityTLSProfile.

  13. Select the Rewrite URL check box.
  14. Click Add at the bottom of the page to create a set of rules and configure the rules as described in External traffic rules for a single FQDN deployment.
  15. Click Finish.
Related information
External traffic rules in a multiple FQDN deployment
Reverse proxy configuration checklist for a multiple FQDN deployment