Screen Link

Last Updated : Sep 11, 2020 |
Prolog information
Metadata
Keywords:
You can present content from a laptop on an XT Series monitor without connecting it to the XT Codec Unit using theScreen Link feature. If you are also using the XT Series monitor for a video conference, the content is shared with all participants of the meeting, located in the same room and remotely.

Presenting content using an XT Series endpoint

Prolog information
Metadata
Keywords:
Depending on its security configuration, an XT Series endpoint functions in one of the following ways:
  • Rejects Screen Link: The endpoint does not allow anyone to connect to it for screen sharing.
  • Requires password: The endpoint generates a one-time password that you must enter on your laptop to connect to it.
  • Authenticates: The endpoint connects seamlessly.
  1. To search for an endpoint:
  2. In the Notification area of your laptop, right-click Avaya IX Workplace and select Screen LinkSearch for Endpoints.
    STEP RESULT:
    searches for accessible XT Series endpoints and displays a list of endpoints that you can connect to.
  3. Select the XT Series endpoint that you want to use.
  4. To connect to an endpoint using the IP address of the endpoint:
  5. In the Notification area of your laptop, right-click Avaya IX Workplace and select Screen LinkEnter a Manual LocationEnter a Manual Location.
  6. Enter the IP address of the endpoint on your laptop and select Connect.
  7. If the XT Series endpoint is protected with a password:
  8. Enter the password displayed on the endpoint screen and select OK.
    STEP RESULT:
    displays the content on the screen of the XT Series endpoint or the content is shared with remote participants.
  9. To stop presenting your content on the endpoint screen:
  10. In the Notification area of your laptop, right-click Avaya IX Workplace and select Screen LinkEnd Screen Link.