Configuring Avaya Aura Device Services using the configuration utility

Last Updated : Jun 10, 2026 |

Before you begin

Finish installing Avaya Aura® Device Services. Otherwise, the app configure command will not work.

Procedure

  1. Optional Run the Avaya Aura® Device Services configuration utility using the app configure command. 
    app configure
    Important:

    Perform this step only if you run the configuration utility at a later time after the installation.

    During the installation, the configuration menu is displayed after you accept the EULA.

    The script checks the current configuration of Avaya Aura® Device Services and opens the configuration menu.

  2. Provide the required configuration settings.
  3. Select Continue and press Enter.

Next Steps

The following settings are mandatory for an Avaya Aura® Device Services installation:

  • Front-end host, System Manager and certificate configuration, if not configured during the initial installation phase.

  • LDAP authentication parameters.

  • Cassandra username and password.

  • Cluster configuration, mandatory if you are deploying an Avaya Aura® Device Services cluster.

  • Utility Server virtual IP and FQDN, if you enabled the Utility Server during the initial installation phase.

  • Leave CORS Configuration and Serviceability Agent Configuration unchanged.

  • Onboard Open LDAP replication, which is mandatory if you enabled Open LDAP in a cluster deployment.

    Important:

    Configure Open LDAP replication after configuring all cluster nodes.

  • OAuth configuration, including Keycloak configuration and OAuth database replication. These steps are mandatory if you enabled OAuth.

    In a cluster environment, configure OAuth settings only after configuring all cluster nodes.

To configure advanced settings, such as certificate warning period, security banner, or re-run the firewall configuration script, select the Advanced Configuration menu option.

Important:
After you configure the mandatory settings, you must restart the Avaya Aura® Device Services service: 
svc aads restart

If there are other settings that you must configure after restarting the Avaya Aura® Device Services server, you can run the configuration utility as described in Step 1 and gain access to the required configuration settings.