Configuring A10 for LDAP searches

Last Updated : Jun 05, 2026 |

About this task

The following procedure describes how to perform A10 configuration to enable LDAP searches for clients.

Procedure

  1. To create an LDAP backend server, do the following:
    1. In the ACOS administrative interface, click the Config Mode tab.
    2. Select SLB > Service > Server.
    3. Click Add twice.
    4. In the General section, configure the name and the host or IP address of the LDAP backend server.
    5. In the Port section, configure the port and the weight.
    6. Click OK and then click Save.
  2. To create a service group, do the following:
    1. In the ACOS administrative interface, click the Config Mode tab.
    2. Select SLB > Service > Service Group.
    3. Click Add.
    4. In the Service Group section, configure the name of the LDAP service group.
    5. In the Server section, select the servers to add to the service group.
    6. Click OK and then click Save.
  3. To create a virtual service, see Creating a virtual service.
  4. To edit a virtual server, do the following:
    1. In the ACOS administrative interface, click the Config Mode tab.
    2. Select SLB > Service > Virtual server.
    3. Click Edit.
    4. Edit the configuration of the virtual server.
    5. Click OK and then click Save.