Last Updated : Aug 10, 2023 |
Prolog information
Resource Id: Type_field:1023
Use this field to specify the telephone type. You must administer the station type for each station that you add to the system.
The following table lists the telephones, virtual telephones, and personal computers that you can administer on Communication Manager. Telephones that are not in the table require an alias to a supported set type.
Note:
If Terminal Translation Initialization is enabled, you cannot change the analog telephones administered with hardware to a virtual extension.
Telephone type
Model
Administered as
Single-line analog
500
500
2500, 2500 with Message Waiting Adjunct
2500
6210
6210
6211
6210
6218
6218
6219
6218
6220
6220
6221
6220
CallerID
Analog telephone with Caller ID
CallrID
7101A, 7102A
7101A
7103A Programmable and Original
7103A
7104A
7104A
8110
8110
DS1FD
DS1FD
7302H, 7303H
7303S
Voice Response Unit (VRU) with C&D tones
VRU
VRU without C&D tones
2500
Single-line DS1/DSO
DS1 device without forward disconnect
ops
VRU with forward disconnect without C&D tones
ds1fd or ds1sa
VRU with forward disconnect without C&D tones
VRUFD or VRUSA
Terminals
510D
510
515BCT
515
Multi-appearance hybrid
7303S
7303S, 7313H
7305H
7305S
7305S
7305S, 7316H, 7317H
7309H
7309H, 7313H
7313H
7313H
7314H
7314H
7315H
7315H
7316H
7316H
7317H
7317H
Multi-appearance digital
2402
2402
2410
2410
2420
2420
6402
6402
6402D
6402D
6408
6408
6408+
6408+
6408D
6408D
6408D+
6408D+
6416D+
6416D+
6424D+
6424D+
7401D
7401D
7401+
7401+
7403D
7403D
7404D
7404D
7405D
7405D
7406D
7406D
7406+
7406+
7407D
7407D
7407+
7407+
7410D
7410D
7410+
7410+
7434D
7434D
7444D
7444D
8403B
8403B
8405B
8405B
8405B+
8405B+
8405D
8405D
8405D+
8405D+
8410B
8410B
8410D
8410D
8411B
8411B
8411D
8411D
8434D
8434D
9404
9404
9408
9408
CALLMASTER I
602A1
CALLMASTER II, III, IV
603A1, 603D1, 603E1, 603F1
CALLMASTER VI
606A1
IDT1
7403D
IDT2
7406D
IP Telephone
4601+
Note:
When you add a new 4601 IP telephone, you must use the
4601+
4602+
Note:
When you add a new 4602 IP telephone, you must use the
4602+
4606
4606
4610
4610
4612
4612
4620SW IP (G3.5 hardware)
4620
4621
4621
4622
4622
4624
4624
4625
4625
4690
4690
9608
9608
9610
9610
9611
9611
9620
9620
9621
9621
9630
9630
9640
9640
9641
9641
9650
9650
SIP IP Telephone
  • 4602SIP with SIP firmware
  • 4610SIP with SIP firmware
  • 4620SIP with SIP firmware
  • 4620SIP CC (Call Center)
  • SIP Softphone/Avaya one-X Desktop
  • Toshiba SP-1020A
Note:
You must administer any telephone with SIP firmware used for SIP networking as a 4620SIP, 96xxSIP, or 16CC SIP telephone.
Note:
Communication Manager Release 6.2 and later do not support 1616SIP CC and 4620SIP CC telephones.
4620SIP
9601SIP
9608SIP
9620, 9630, 9630G 9640, 9640G with SIP firmware
96xx or 96xxSIP telephone
9608 with SIP firmware
9608SIP
9611 with SIP firmware
9611SIP
9621 with SIP firmware
9621SIP
9641 with SIP firmware
9641SIP
9608 with SIP firmware (for call center)
9608SIPCC
9611 with SIP firmware (for call center)
9611SIPCC
9621 with SIP firmware (for call center)
9621SIPCC
9641 with SIP firmware (for call center)
9641SIPCC
AvyaSIP
J139, J159, J189
AvyaSIPCC
J189CC
H.323 SoftPhone
application Road Warrior
H.323 or DCP type
Native H.323
H.323
Singleconnect
H.323 or DCP type
Any NI-BRI (N1 and N2) telephone
NI-BRI
7505D
7505D
7506D
7506D
7507D
7507D
8503D
8503D
8510T
8510T
8520T
8520T
Personal computer
6300/7300
PC
(voice/data)
6538/9
Constellation
Test Line
ATMS
105TL
No hardware assigned at the time of administration.
  • Use XDID when Communication Manager assigns a DID number to the station.
  • Use XDIDVIP when the administrator later assigns a DID number to the station.
  • Use virtual to map the station and other extensions to one physical telephone.
Key telephone system interface
—
K2500
AWOH
any digital set
—
CTI station
CTI
CTI
CTI station
CTI
XMOBILE
EC500, DECT, PHS
XMOBILE
ISDN-BRI data module
7500
7500
SBS Extension
SBS test extension (no hardware)
sbs