IP range criteria

Last Updated : Nov 06, 2012 |
Prolog information
Metadata
Keywords:
Range Type two IP addresses to set a range of IP addresses to which the rule applies. You can use wildcards in setting the range. For example:
Gxxx-001(super-Capture 520/ip rule 20)# source-ip 135.64.102.0 0.0.255.255
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
Single address Type host, by an IP address, to set a single IP address to which the rule applies. For example:
Gxxx-001(super-Capture 520/ip rule 20)# destination-ip host 135.64.104.102
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
Wildcard Type host, followed by an IP address using wildcards, to set a range of IP addresses to which the rule applies. For example:
Gxxx-001(super-Capture 520/ip rule 20)# source-ip host 135.0.0.0
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
Any Type any to apply the rule to all IP addresses. For example:
Gxxx-001(super-Capture 520/ip rule 20)# destination-ip any
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
To apply the rule to all source or destination IP addresses except the specified address or range of addresses, use the not form of the applicable command. For example:
Gxxx-001(super-Capture 520/ip rule 20)# not destination-ip 135.64.102.0 0.0.255.255
Done!
Gxxx-001(super-Capture 520/ip rule 20)#