Notification types

Last Updated : Nov 06, 2012 |
Prolog information
Various types of SNMP traps can be sent. You can modify the type of trap by setting the notification-list parameter of the snmp-server host command to one of the following types:
  • all. All traps. This is the default.
  • generic. Generic traps
  • hardware. Hardware faults
  • rmon. RMON rising/falling alarm
  • dhcp server. DHCP server error, such as a DHCP IP conflict detection or notification of no IP address left for specific network
  • dhcp-clients. DHCP client error, such as a DHCP client conflict detection
  • rtp-stat-faults. RTP statistics: QoS fault/clear traps
  • rtp-stat-qos. RTP statistics: end-of-call QoS traps
  • wan. WAN router traps
  • media-gateway. Branch Gateway traps (equivalent to G700 MGP traps)
  • security. Security traps, such as unAuthAccess, macSecurity, unknownHostCopy, and accountLockout
  • config. Configuration change notifications
  • eth-port-faults. Ethernet port fault notifications
  • sw-redundancy. Software redundancy notifications
  • temperature. Temperature warning notifications
  • cam-change. Changes in CAM notifications
  • 13-events. Duplicate IP, VLAN violations
  • policy. Policy change notifications
  • link-faults. ITC proprietary link down notifications
  • supply. Main and backup power supply notifications