Configuring IP Office server as SIP Proxy Server on J1xx IP Phone

Last Updated : Aug 01, 2025 |

About this task

You must configure the IP Office server as SIP Proxy Server on the J1xx IP Phone. You can set the protocol to TCP or TLS.

Before you begin

Download the ACO_J1xx_Persistsettings.txt file from the J1xx web interface. For more information, see Downloading Avaya Cloud Office J1xx persist settings file.

Procedure

  1. In the ACO_J1xx_Persistsettings.txt file, do the following:
    1. Navigate to the Registration Info section.
    2. Add the IP Office IP address and the protocol in the SET SIP_CONTROLLER_LIST value after the ACO address.
      For example, 
      SET SIP_CONTROLLER_LIST siplvs=avayams.int.rclabenv.com:5096;transport=tls, 148.147.171.101:5060;transport=tcp

      You can set the protocol to tcp or tls.

  2. Save the file to a local drive.
  3. Log in to the J1xx IP Phone web interface using the username and password.
  4. If you set the protocol to tls in Step 1b, import the IP Office WebRoot.pem file to the J1xx Trusted store:
    1. Download WebRoot.pem using the URL: https://<IP Office IP address>/WebRootCA.pem to your local drive.

      For example, https://10.102.159.180/WebRootCA.pem

    2. Go to Certificates > Trusted Certificates.
    3. In the Upload Trusted Certificate field, click Browse.
    4. Select the downloaded WebRoot.pem file and click Open.
    5. Click Import.

      J1xx IP Phone reboots.

    Note:

    You must complete the steps in Step 4, only if you set the protocol to tls in Step 1b. Else, skip this step.

  5. Go to Management > Configuration.
  6. In Import Settings File, click Import.
  7. Select the file you saved in Step 2 and click Open.
  8. Click Import.

    J1xx IP Phone reboots.