If two software versions are installed on the module you can switch between them.
Procedure
Click Configuration on the start page.
Select Software > Switch in the menu on the Configuration page.
Under Select settings, select one of the following:
Keep previous settings — means that the settings last used for the software is activated again after the switch. This option is only available if the software has been used at least one time before.
Copy Current settings — means that you copy the configuration from the software you are currently using and is only available if both software are of the same type.
Use factory default settings — means that you apply the default settings that were delivered from the factory.
Note:
The active software current network settings will be kept and will also be applied to the software you want to switch to.
