Creating IP DECT Lines

Last Updated : Apr 19, 2013 |

About this task

Use the following procedure to create an IP DECT line for traffic between the IP Office and the Avaya Wireless DECT system. The line is configured with the IP address that will be assigned to the master base station. The IP Office configuration only requires a single IP DECT line.

Procedure

  1. Using IP Office Manager, retrieve the configuration from the IP Office system.
  2. Click on Line. The list of existing lines is shown.
  3. Click on the icon and select IP DECT Line. The settings for an IP DECT line are displayed. If the option is grayed out then the configuration already contains an IP DECT line.
  4. On the Line tab there are no adjustable settings. Once the system is installed and operational, this tab lists the DECT extensions.




  5. Select the VoIP tab. This table is used to set details of the master base station.




  6. Set the Gateway IP Address to match the IP address that will be assigned to the master base station.
  7. Leave the Codec Selection set to System Default if it includes the required codecs, otherwise change the setting to Custom and adjust the selected codecs.

    • The 3700 Series phones do not support the OPUS and G.723 codecs.

    • The 3755 and 3759 phones require the G.722 codec to be supported.

  8. Select the Gateway tab
  9. Enter the SARI/PARK and Authentication Code into the appropriate fields. These values are used during the phone subscription process.
    Note:

    • To uniquely identify a single system (for example to generate a PARK code), one SARI certificate (Secondary Access Rights Identifier) is required per DECT installation to identify the system.

Related information
Configuring IP Office