Enabling HTTPS and Security Certificates in the Web Interface

Last Updated : Sep 06, 2022 |

About this task

Depending on your site configuration, you may need to enable provisioning in the device configuration so that the IP DECT allows both self-signed certificates and approved certificates from a trusted location. You can also configure this option in IP Office Manager. See Enabling HTTPS and Security Certificates in IP Office Manager.

Procedure

  1. Begin by enabling the advanced view in the Web Interface. Refer to Select Administration Mode.
  2. Ensure that HTTPS provisioning is enabled.
  3. Save the configuration and reset the device.
  4. Select General | Certificates and wait to see the certificate from IP Office appear in the Not trusted list.




  5. Under Rejected Certificates, select the desired certificate from the Not trusted list and press the Trust button.




    The certificate should now appear in the Trust List section. No reset is required.





Related information
Master Base Station Setup