During initial installation the IP address of a base station defaults to 192.168.0.1. The process below can be used to change the DHCP mode and IP address of a base station.
Procedure
From the base station configuration window, in the left-hand column, select LAN.
Select the IP tab.
Enter the required IP Address and Network Mask for the base station. The other settings are optional.
Click OK.
Note:
The menu will prompt you with the message Reset Required. Do not click this or reset the base station at this stage.
Select the DHCP tab.
Using the Mode drop-down, select Disabled.
Click OK.
Select Reset and then select the Reset tab.
Click OK.
Depending on your base station, wait for the LED to return to solid blue or solid green.
