Complete the installation and licensing/subscription of the IP Office system which the application server will be supporting.
If the IP Office server is being managed through COM, ensure that the adjunct server service user password has been set. See Service User Configuration for COM Support.
Connect to the application server using IP Office Web Manager. See Starting Web Manager.
Set a unique System Name for the system. This will appear in other administration menus and helps identify the particular server.
If applicable, enter the Services Device ID issued for support of the server.
If the customer network has a specific DNS Server, enter its address.
Set the Locale to match the customer location. Set this accurately as it affects a number of default telephony settings that the system will then use.
In IP Office FQDN/IP Address, enter the address of the IP Office system which the application server will be supporting.
For the Adjunct Server Password, enter the password set for the Adjunct Server service user configured on the IP Office system which the application server will be supporting. See Service User Configuration for COM Support.
Using the Public LAN Interface control:
Select LAN1 and check that the IP Address and IP Mask match the network settings that the server should use for its eth0 port.
Select which DHCP Mode the server should support on the LAN.
Option
Description
Server
The server will act as a DHCP server for the network on that interface. For its own address it will use the IP Address details entered in this menu.
Client
The server will obtain its IP address settings automatically from a DHCP server elsewhere on the network.
Dial In
This DHCP mode is not supported on Linux-based IP Office servers.
Disabled
The server will use the fixed IP address details entered in this menu.
Select LAN2 and check that the IP Address and IP Mask settings match the network settings that the server should use for its eth1 port.
Set the Gateway address for the customer network.
Click Apply.
Next Steps
The remaining stages depend on whether the application server will be supporting a Server Edition network or an IP500 V2 systems.
