Adding an IP500 V2 Expansion using Manager

Last Updated : Dec 04, 2020 |

This process adds an IP500 V2 control unit to the network as an expansion server.

Before you begin

Complete the IP500 V2 system's initial configuration. See Initial IP500 V2 Configuration using Manager.

Start Manager. See Starting IP Office Manager.
1. Click File > Open Configuration.
2. From the Select IP Office menu, select the primary server and click OK.
3. Enter Administrator and the password configured for that user account during the primary server’s ignition. Click OK.
Click Solution. On the Summary menu, on the right under Add, click Expansion Server.
In the Add Expansion System window, either:
- Enter the IP address of the server and click OK.
- Click on the search icon. Select the server from those listed and click OK.
If the initial configuration menu appears for the server, complete it. See Initial IP500 V2 Configuration using Manager.
Click File > Save Configuration
Check that the Change Mode is set to Reboot and click OK.
Click Next. The IP Office services on the servers are restarted using the new configuration.
For non-subscription systems, assign the licenses required by the server in the same way as done for the primary server. See Assigning PLDS licenses.

For subscription mode systems, if this is the final system being added, enable COM support on the systems. See Enabling COM Support on Server Edition Systems:
For non-subscription systems, assign the licenses required by the server from those available on the networks primary server. See Assigning PLDS licenses.

Send Feedback