Adding an IP500 V2 Expansion using Web Manager

Last Updated : Dec 04, 2020 |

This process adds an IP500 V2 control unit to the network as an expansion server.

Before you begin

Complete the IP500 V2 system's initial configuration. See Initial IP500 V2 Configuration using Manager.

Connect to the primary IP Office server using IP Office Web Manager. See Starting Web Manager.
Click Solution.
Select Configure > Add System to Solution.
Select Expansion server.
Enter the IP address set during the server ignition. Otherwise click on Discovery Preferences and configure the range of addresses to search.
Click Discover.
From the list of discovered IP Office servers, select the required IP Office server and click Next.
If prompted, select the primary IP Office server IP address to link and click OK.
For a newly ignited IP Office server, the initial configuration menu server is displayed.
Click Save. The server’s configuration is opened in manager. At this stage it has not been saved to the system.
Click File > Save Configuration
Check that the Change Mode is set to Reboot and click OK.
Click Next. The IP Office services on the servers are restarted using the new configuration.

For subscription mode systems, if this is the final system being added, enable COM support on the systems. See Enabling COM Support on Server Edition Systems:
For non-subscription systems, assign the licenses required by the server from those available on the networks primary server. See Assigning PLDS licenses.

Send Feedback