Using IP Office Web Manager, connect directly to the new IP500 V2 system.
Login using the default user name Administrator and password Administrator.
You are prompted to change the default passwords.
Password
Description
Administrator Password
This password is used for access to the system's telephony and security configuration.
Security Administrator Password
This password is used for access to the system's security configuration only.
System Password
This password is used for system upgrades and can also be used for connections using SysMonitor.
The server's initial configuration menu is now shown. Ensure that you select the correct System Mode. Either:
For a subscription system: Server Edition Expansion - Subscription.
For other systems: Server Edition Expansion.
Set a unique System Name for the system. This will appear in other administration menus and helps identify the particular server.
If applicable, enter the Services Device ID issued for support of the server.
Set the Locale to match the customer location. Set this accurately as it affects a number of default telephony settings that the system will then use.
Set and confirm the Default Extension Password. This is used to set the extension password required to register IP extension unless a separate specific password is configured in the extension’s own settings.
Using the Public LAN Interface control:
Select LAN1 and check that the IP Address and IP Mask match the network settings that the server should use for its eth0 port.
Select which DHCP Mode the server should support on the LAN.
Option
Description
Server
The server will act as a DHCP server for the network on that interface. For its own address it will use the IP Address details entered in this menu.
Client
The server will obtain its IP address settings automatically from a DHCP server elsewhere on the network.
Dial In
This DHCP mode is not supported on Linux-based IP Office servers.
Disabled
The server will use the fixed IP address details entered in this menu.
Select LAN2 and check that the IP Address and IP Mask settings match the network settings that the server should use for its eth1 port.
Set the Gateway address for the customer network.
Enter the IP address of the Server Edition Primary.
For Server Edition Secondary, enter the IP address of the planned secondary server. If there is no plan to add a secondary server, enter a dummy address.
For a Server Edition - Select and Server Edition - Subscription network, you can selection whether the primary or secondary should provide the voicemail services for the expansion server.
If the customer network has a specific DNS Server, enter its address.
Enter an Web Socket Password password. This password is used for the links to other IP Office servers in the network.
Check the settings are all as required and match the customer network requirements.
Click Apply.
The configuration menu provides a range of other options. For an expansion system these can be skipped and the system configured once it is part of the full network. Click Save to IP Office.
