Description

This column describes the type of server being detailed by the row. It also includes a status indicator for the configuration file that Manager has loaded for the server.

• Green -  Configuration Loaded The configuration of the server has been successfully retrieved and can be edited in Manager.

• Yellow - Offline Configuration Loaded The configuration loaded is an offline configuration. This will appear for a server that has been added to the solution when the physical server is not currently connected on the network and Create Offline Configuration was selected. The offline configuration file is stored on and retrieved from the primary server until it can be replaced by or replace the actual server configuration.

• Red -  Configuration Not Loaded There is no configuration for the system loaded even though the solution configuration includes an entry for the server. This will appear for a server that has been added to the network when the physical server is not currently connected on the network and Create Offline Configuration was not selected. If may also appear if the server is currently not contactable.  

• Grey -  No Connection This icon is used in conjunctions with the others to indicate that there is no current connection to the server. For example:

  • In conjunction with a green icon, it indicates that the server for which a configuration has been loaded cannot be detected on the network. This may be a temporary issue caused by that particular server rebooting following a configuration change.

  • In conjunction with a red icon, it indicates that the server for which a configuration has not been loaded has now been detected on the network. Saving and reloading the solution configuration may resolve the issue.

Name

This is the server name as taken from its configuration file. Offline is shown if no configuration file is available.

Address

The IP address of the server. This is the address that is used when Manager attempts to retrieve the servers configuration when loading the solution configuration.

Primary Link

This value indicates the configuration settings of the H.323 IP trunk between the primary server and the server indicated by the row. It should state Bothway. If it states anything other, that indicates a mismatch in H.323 IP trunk configuration between the system and the primary server. To correct this, right-click on the row and select Connect to Primary.

Secondary Link

This column is only shown after a secondary server has been added to the configuration of the solution. The value indicates the configuration settings of the H.323 IP trunk between the secondary server and the server indicated by the row. It should state Bothway. If it states anything other, that indicates a mismatch in H.323 IP trunk configuration between the system and the secondary server. To correct this, right-click on the row and select Connect to Secondary.

Users Configured

This column summarizes the number of users (other than NoUser) configured on the server. A total for the whole network is shown in the Solution row.

Extensions Configured

This column summarizes the number of extensions configured on the server. A total for the whole network is shown in the Solution row.