Loading a Small Community Network Configuration

Last Updated : Oct 09, 2014 |

About this task

If Manager is configured with SCN Discovery enabled, the Select IP Office menu will display any SCNs it discovers.

With no configuration loaded, click on or select File | Open Configuration.
The Select IP Office menu is displayed.

Any systems in a Small Community Network will be grouped together.
To load the configuration of all the systems in the network, click the check box next to the network name and then click OK.
If a warning icon is displayed next to the SCN check box, it indicates that not all the systems known to be in the Small Community Network were discovered. Hovering the cursor over the icon will display details of the missing systems. Loading the network configuration at this time would not include the configuration of the missing system or systems. The missing systems:
- May be disconnected
- The discovery settings for the Manager PC may be incorrect.
- The data routing between the Manager PC and the missing systems may be incorrect or blocked.
Enter the name and password for configuration access to each system.

If the systems all have a common user name and password (see Common Administrator Access below), select Use above credentials for all remaining selected IPOs. Click OK.
Manager will load and display the combined configurations in Small Community Network Management mode.

Send Feedback