LAN2

Last Updated : May 27, 2015 |

Navigation: System | LAN2

These settings used to configure the system's second LAN interface.

These settings are not mergeable. Changes to these settings will require a reboot of the system.

The fields available for LAN2 are the same as for LAN1 except for the following:

  • Avaya supports IPv6 on IP Office LAN1. Avaya also supports IPv6 on LAN2 but only when IPv6 is enabled on LAN1 also.

Field

Description

Firewall

Default = <None> (No firewall)

Allows the selection of a system firewall which the IP Office applies to traffic routed from LAN2 to LAN1.
Related information
System