You can use these settings to setup static IPv6 routes for the IP Office system. The IP Office supports up to 100 static, dynamic, and internal routes.
These settings are mergeable. Changes to these settings do not require a reboot of the system.
Field |
Description |
IP Address |
The IPv6 address to match for ongoing routing. The IP Office routes any packets meeting the IP address and subnet prefix settings to the specified Destination. |
Prefix Length |
Default = Blank. Range = 1 to 128. The prefix length used for address matching. |
Gateway IP Address |
Default = Blank The address of the gateway to which the IP Office sends packets that match the route. |
Destination |
Select LAN1, LAN2, any configured Service, or any Tunnel (L2TP only). |
Metric: |
Default = 0 The number of "hops" this route counts as. |
