Use this procedure to enable the Toggle button in the Locations area of Avaya Control Manager on each server.
Before you begin
You must configure the details on the primary Avaya Control Manager server in Data Center 1. The Avaya Control Manager HA replication provides these details into the Avaya Control Manager database in Data Center 2. Ensure that you have access to Avaya Control Manager servers in Data Center 1 and Data Center 2.
Procedure
On the Avaya Control Manager webpage, click Configuration > General > System Parameters.
Scroll to the bottom and select the Enable Oceana Disaster Recovery Support check box.
Click Save.
To disable the Disaster Recovery option, clear the Disaster Recovery checkbox.
If any disaster recovery enabled systems are in a fail-over state, Avaya Control Manager disables the Disaster Recovery checkbox. The administrator cannot disable the Disaster Recovery option.
On the Avaya Control Manager webpage, click Configuration > Locations.
Select the location of your Avaya Oceana® and click Edit.
On the Location Edit page, click the Systems tab.
Verify that the Toggle button is available next to the Delete button on the tool bar.
This toggle button is used for switching Avaya Control Manager from Data Center 1 to Data Center 2 and vice versa.
Expand the width of the browser window and verify that there is a Switched Over column to the right-hand side of the browser.
