Adding a Survivable Processor on Communication Manager

Last Updated : Dec 01, 2022 |

About this task

Use this procedure to add a Survivable Processor entry on the Communication Manager for the Enterprise Survivable Server using the node name created. For more information, refer Adding a node name for Enterprise Survivable Server on Communication Manager.

Procedure

  1. Log on to Communication Manager System Access Terminal (SAT) as init user.
  2. Run the command: add survivable processor <node name>
  3. On the configuration page 1, enter the following:
    1. In Type, enter simplex-ess.
    2. In Cluster ID/MID, enter the cluster number in use.
    3. In Enable PE for H.323 Endpoints?, enter y.
    4. In Enable PE for H.248 Gateways, enter y.
      Important:

      Retain the other field values as default. V4 Node Name and Address fields auto populates with details from the node name created earlier.

  4. On the configuration page 2, ensure that AESVCS is enabled.

    This field is enabled by default.

  5. On page 3, in Priority with respect to Media Servers, enter 2.
    Important:

    Further page options open. Available pages change from 3 to 8, where you can configure the Avaya Aura® Media Server that the Enterprise Survivable Server uses.

  6. On page 4, enter the Avaya Aura® Media Server number that the Enterprise Survivable Server is using.
  7. To view list of available Avaya Aura® Media Servers run the command: list media-server

    The Node-Name field is populated automatically.

  8. On configuration pages 5,6,7 and 8, retain the default values.
  9. Press F3 to save the changes.
  10. To save translations after the configuration changes, run the command: save translations