Setting the cluster activity status for the clusters in DC2

Last Updated : Feb 13, 2023 |

Before you begin

You must install OceanaMonitorService on the clusters in DC2.

Procedure

  1. Open the Oceana Manager page by entering the following URL in your web browser:

    https://<DataCenter2_AvayaOceanaCluster1_FQDN>/ services/OceanaMonitorService/manager.html?affinity=

    Important:

    You can create a bookmark of this URL in your web browser, so that you can open the Oceana Manager page even when System Manager is unavailable.

  2. Optional To open the Oceana Manager page through System Manager, do the following:
    1. On the System Manager web console, click Elements > Avaya Breeze® > Cluster Administration.
    2. On the Cluster Administration page, in the Service URL column for Avaya Oceana® Cluster 2, select Oceana Manager.
  3. Log in to Oceana Manager using an Admin account.
  4. On the Oceana Manager page, do the following:
    1. Check the status of Primary and Backup DC clusters and also check Data Replication and Service Install status have green check marks.
    2. If the status of the clusters is ACTIVE, click Set Cluster Group to Standby to change the status to STANDBY.
    3. On the confirmation message box, click OK.
    4. Optional If the Oceana Manager page does not display the updated status after some time, click Refresh.
    5. Verify that all clusters and nodes in DC2 are now in the Deny state.