Joining mirror for OCP DB server B as failover member (Standby Server)

Last Updated : Jun 03, 2024 |

About this task

Use this procedure to join mirror for the OCP DP Server B as failover member.

Procedure

On Server B in the primary site, do the following:

  1. Navigate to the OCEANA_INSTALL_DIR\Avaya\Oceana\MMDataManagement folder.
  2. Right-click the OceanaDataManagementTool.exe file and click Run as administrator.
  3. In the navigation pane, click Configuration > Mirror Settings > Join Mirror .
  4. In the Type attribute, select Failover.
  5. Enter the IP address of the agent and select Virtual address interface.
  6. If SSL is configured on the primary server, select the Require SSL/TLS check box to set up SSL/TLS.
    1. In the File containing trusted Certificate Authority X.509 certificate field, enter the location of your CA.
    2. In the File containing this configuration's X.509 certificate field, select the server certificate from the list.
    3. In the File containing associated private key field, select the key from the list.
    4. In the Private key password field, enter the new password.
  7. Click Save.
  8. Copy the backup file from the active Omnichannel Database server to the standby Omnichannel Database server in Data Center 1.
  9. In the Oceana Data Management utility, click Backup And Restore.
  10. In the navigation pane, click Backup And Restore.
  11. In the Select file to restore from field, click Browse.
  12. On the Open window, do the following:
    1. Browse to the location where you stored the backup file.
    2. Select the backup cbk file.
    3. Click Open.
  13. Click Restore Database.

    The system displays the message:Are you restoring a mirrored backup?

  14. Click Yes.
  15. Click Restore.

    The utility displays the Restore complete! message when the restore process is complete.