Use this procedure to install Avaya Aura® Device Services.
Before you begin
On the System Manager web console, click Elements > Session Manager > Dashboard and verify that all Session Manager instances are up and running.
Procedure
Go to the Avaya directory by typing the following command:
cd /opt/Avaya
Run the following command:
app install
The Initial Installation Configuration screen appears.
Select the Cluster Configuration menu and ensure that the Initial cluster node option is set to y.
To return to the previous menu, select Return to Main Menu and press Enter.
Select the Front-end host, System Manager and Certificate Configuration menu and configure the settings that are accessible from the menu.
In the Front-end FQDN field, type the Avaya Aura® Device Services FQDN to extend the system to an Avaya Aura® Device Services cluster.
You must use the hostname corresponding to the virtual IP address. For a standalone Avaya Aura® Device Services, this field is the same as the local front end host.
In the fields specific to System Manager, enter the required values.
Keystore password must have six or more characters. The password must be the same on all nodes in the cluster.
After you enter the System Manager FQDN and press OK, the installer tries to check the validity of the hostname.
Select Return to Main Menu and press Enter.
Select the Session Manager Cassandra Configuration menu and type the Session Manager Management and Asset IP addresses.
Read the End User License Agreement (EULA) and press Accept to accept the EULA.
The system configures the other settings such as required RPMs, downloads certificates from System Manager, creates database schema, and does the required initial configuration required for the Avaya Aura® Device Services server installation.
Select Continue to finish the installation.
Select LDAP Configuration.
On the LDAP configuration screen, type values for each parameter manually.
Important:
Do not copy-paste these values to avoid invalid characters such as spaces.
Navigate to Advanced LDAP parameters and click Select.
On the Advanced LDAP parameter screen, verify the default values for the parameters and update the required values.
Select Return to Main Menu and press Enter.
Navigate to TestUser and click Select.
Add an LDAP test user for better validation of the LDAP parameters.
The test user must be a valid user on LDAP and must be present in the provided Base Context DN. The LDAP user must correspond to UID Attribute ID.
Click OK.
Click Apply.
Click Yes.
Click Continue.
Leave the CORS Configuration and Serviceability Agent Configuration fields unchanged.
Click Continue.
On the prompt to restart Avaya Aura® Device Services, click Yes.
