Adding a server configuration for Session Manager

Last Updated : Dec 07, 2020 |

Procedure

  1. Log on to the EMS web interface with administrator credentials.
  2. In the navigation pane, click Global Profiles > Server Configuration.
  3. Click Add.
  4. In the Profile Name field, type a name for the new server profile and click Next.
  5. In the Server Type field, select Trunk server.
  6. Leave the SIP Domain field blank.
  7. In the DNS Query Type field, select NONE/A.
  8. In the TLS Client Profile field, enter the client profile that you created for the Avaya Aura® Session Border Controller signaling interface.
  9. In the IP Addresses/FQDNs field, enter the IP address of the Session Manager server.
  10. In the Port field, type 5061.
  11. In the Transport field, select TLS.
  12. Keep the default values in the other fields and click Next.
  13. On the Add Server Configuration Profile - Advanced page, do the following:
    1. Select the Enable Grooming check box.
    2. In the Interworking Profile field, select the newly created interworking profile with remote SBC disabled.
    3. Keep the default values in the other fields.
    4. Click Finish.