Adding the Avaya Aura Session Border Controller configuration to Avaya Aura Web Gateway

Last Updated : Dec 15, 2020 |

Procedure

  1. In your web browser, enter the following URL to log on to Avaya Aura® Web Gateway administration portal:

    https://<Avaya Aura Web Gateway_FQDN>:8445/admin

  2. On the Avaya Aura® Web Gateway administration portal, click External Access > Session Border Controller.
  3. Click Add.
  4. In the SIP Address field, type the address of the Avaya Aura® Session Border Controller internal interface that you specified while creating the Avaya Aura® Session Border Controller signaling interface.
  5. In the SIP Port field, type 5061.
  6. In the SIP Protocol field, select TLS.
  7. In the HTTP Address field, type the address of the Avaya Aura® Session Border Controller internal interface that you specified while configuring Avaya Aura® Session Border Controller for load monitoring.
  8. In the HTTP Port field, type 80 if you are using HTTP protocol or 443 if you are using HTTPS protocol.
  9. In the HTTP Protocol field, select http or https.
  10. In the Location field, specify the location of the Avaya Aura® Session Border Controller server.
  11. Click Save