Adding a TURN/STUN service for Avaya WebRTC Connect clients

Last Updated : Sep 28, 2020 |

Procedure

  1. Log on to the EMS web interface with administrator credentials.
  2. In the navigation pane, click DMZ Services > TURN/STUN Service > TURN/STUN Profiles.
  3. On the TURN/STUN Profiles tab, click Add and do the following:
    1. In the Profile Name field, type an appropriate name.
    2. In the UDP Listen Port field, type 3478.
    3. In the TCP/TLS Listen Port field, type 443.
    4. In the TLS Server Profile field, select the profile create in Creating a server profile for the TLS TURN relay.
    5. In the Media Relay Port Range field, type a value between 50000 to 55000.
    6. In the Authentication field, enable the authentication.
    7. In the Client Authentication field, enable the authentication.
    8. In the Realm field, specify the SIP domain.
    9. In the UDP Relay field, enable the UDP relay.
    10. Click Finish.
  4. On the TURN Relay tab, click Add and do the following:
    1. In the Listen IP field, enter the external interface IP configured on Avaya Aura® Session Border Controller that external clients use.
    2. In the Media Relay IP field, enter the internal IP configured on Avaya Aura® Session Border Controller that Avaya Aura® Web Gateway Avaya Aura® Media Server uses for media.
    3. Keep the Service FQDN field blank.
    4. In the TURN/STUN Profile field, select the TURN/STUN profile that you created.
    5. Click Finish.