Creating a reverse proxy service for the AvayaMobileCommunications snap-in

Last Updated : Jul 05, 2018 |

Before you begin

Create the reverse proxy policy with the Allow Web Socket field set to Y.

Procedure

  1. Log on to the EMS web interface with administrator credentials.
  2. In the navigation pane, click Device Specific Settings > DMZ Services > Relay Services.
  3. On the Reverse Proxy tab, click Add.
  4. On the Add Reverse Proxy Profile page, do the following:
    1. In the Service Name field, type the reverse proxy profile name.
    2. Select the Enabled check box.
    3. In the Listen IP field, click the external Avaya SBCE IP address.
    4. In the Listen Port field, type the port number as 443.
    5. In the Listen Protocol field, click HTTP/HTTPS.
    6. In the Listen TLS Profile field, click the relevant TLS Profile.
    7. In the Server Protocol field, click HTTP/HTTPS.
    8. In the Connect IP field, click the internal Avaya SBCE IP address.
    9. In the Reverse Proxy Policy Profile field, click the reverse proxy policy that you have created.
    10. In the Server Addresses field, type <AvayaOceanaCluster2_FQDN>:443.

      Use the FQDN based on what you used in the SAN name while creating the TLS certificate.

    11. Click Finish.