Configuring Avaya Aura Session Border Controller STUN TURN server for external mobile calls

Last Updated : Jun 20, 2021 |

About this task

Use this procedure to configure the STUN TURN server for external mobile calls.

For detailed information about WebRTC Connect-enabled call processing, see Administering Avaya Session Border Controller.

Procedure

  1. Log on to the EMS web interface with administrator credentials.
  2. In the Device drop-down list, select ASBCE.
  3. In the navigation pane, click DMZ Services > TURN/STUN Service > TURN/STUN Profiles.
  4. On the TURN/STUN Profiles tab, click Add.
  5. In the Profile Name field, type an appropriate name.
  6. In the UDP Listen Port field, type 3478.
  7. In the Media Relay Port Range field, type the port range.
  8. Select the Media Learning check box only for deployments with TURN on Avaya Media Server or MCU.

    Clear this check box for TURN/STUN profile deployment on browser.

  9. Click Finish.
  10. On the TURN Relay tab, click Add.
  11. In the Listen IP field, enter the Listen IP of the TURN server.

    It shows the IP that you created in the TURN/ STUN Profiles tab for the Session Border Controller device.

  12. In the Media Relay IP field, enter the media relay IP of the TURN server.

    It shows the IP that you created in the TURN/ STUN Profiles tab for the Session Border Controller device.

  13. In the Service FQDN field, enter the Listen FQDN of the TURN server.
  14. In the TURN/STUN Profile field, select the TURN/STUN profile that you created.
  15. Click Finish.