Configuring Avaya Aura Session Border Controller server flows for external mobile calls

Last Updated : Aug 27, 2021 |

About this task

Use this procedure to configure the server flows for external mobile calls.

For detailed information about server flows, see Administering Avaya Session Border Controller.

Procedure

  1. Log on to the EMS web interface with administrator credentials.
  2. In the Device drop-down list, select ASBCE.
  3. Create an interworking profile or update an existing profile: In the navigation pane, click Configuration Profiles > Server Interworking.
  4. Click Add to create a new profile.
  5. For a new profile, set all options as default.
  6. In the Advanced Options section, in the Has Remote SBC field, select No.
  7. In the Extensions field, select the correct profile.

    This configuration directs the Session Border Controller security device to use the functionality specific to different environments.

  8. Click Finish.
  9. Add a configuration for Session Manager: In the navigation pane, click Services > SIP Servers.
  10. Click Add.
  11. In the Server Type field, select Call Server.
  12. Leave the SIP domain field blank.
  13. In the TLS Client Profile field, select the previously created client profile if TLS port is specified.

    Add the Session Manager IP or FQDN with port and protocol specified (TCP and/or TLS).

  14. In the Advanced Options section, select the Enable Grooming check box, and then select the previously created interworking profile.
  15. Leave the other settings with their default values.
  16. Click Finish.
  17. Add a flow for Session Manager: In the navigation pane, click Network & Flows > End Point Flows > Server Flows.
  18. Click Add.
  19. In the Flow Name field, enter a name such as SM_Flow.
  20. In the SIP Server Profile field, select the configuration that you previously created for the SIP Server profile for Session Manager.
  21. In the Received Interface field, select the internal interface (A1).
  22. In the Signaling Interface field, select the internal interface (A1).
  23. In the Media Interface field, select the internal interface (A1).
  24. In the Endpoint Policy Group field, select the appropriate option.
  25. Leave the other settings with their default values.
  26. Click Finish.
  27. Add a configuration for the Avaya Aura® Web Gateway server: In the navigation pane, click Services > SIP Servers.
  28. Click Add.
  29. In the Server Type field, select Trunk Server.
  30. Leave the SIP domain field blank.
  31. In the TLS Client Profile field, select the previously created Avaya Aura® Web Gateway client profile if TLS port is specified.

    Add the Avaya Aura® Web Gateway IP or FQDN with port and protocol specified (TCP and/or TLS). Add all cluster nodes.

  32. In the Advanced Options section, select the Enable Grooming check box, and then select the previously created interworking profile.
  33. Leave the other settings with their default values.
  34. Click Finish.
  35. Add a flow for the Avaya Aura® Web Gateway server: In the navigation pane, click Network & Flows > End Point Flows > Server Flows.
  36. Click Add.
  37. In the Flow Name field, enter a name such as AAWGFlow.
  38. In the SIP Server Profile field, select the configuration that you previously created for Avaya Aura® Web Gateway.
  39. In the Received Interface field, select the internal interface (A1).
  40. In the Signaling Interface field, select the internal interface (A1).
  41. In the Media Interface field, select the external interface (B1).
  42. In the Endpoint Policy Group field, select the appropriate option.
  43. Leave the other settings with their default values.
  44. Click Finish.