Configuring a Route Pattern

Last Updated : Nov 29, 2023 |

About this task

After configuring the Signaling and Trunk Groups, you must configure a Route Pattern on Communication Manager.

Before you begin

Ensure that you identify the Route Pattern that you want to configure.

Procedure

  1. Using an SSH client, connect to the Communication Manager System Access Terminal (SAT) interface.
  2. On page 1 of the route-pattern screen, perform the following steps:
    1. In the Pattern Name field, enter a name for the Route Pattern.
    2. In the Grp No field, enter the previously-configured Trunk Group number.
    3. In the FRL field, enter the appropriate FRL.
  3. Save the settings.