Creating a signaling group for Avaya Aura Media Server

Last Updated : Nov 30, 2017 |

Procedure

  1. Using SSH client, connect to the Communication Manager System Access Terminal (SAT) interface.
  2. Run add signaling-group n.

    n is the number of the signaling group that you need to specify.

  3. On page 1 of the SIGNALING GROUP screen, perform the following steps:
    1. In the Group Type field, type sip.
    2. In the Transport Method field, set the method of transport as tcp or tls.
    3. In the Peer Detection Enabled field, type n.
    4. In the Peer Server field, type AMS.
    5. In the Near-end Listen Port field, type 5060 or 5061 based on the method of transport that you set.
    6. In the Far-end Node Name field, enter the node name of Avaya Aura® Media Server that you created.
    7. In the Far-end Listen Port field, type 5060 or 5061 based on the method of transport that you set.
  4. On page 2 of the SIGNALING GROUP screen, perform the following steps:
    1. In the Enable on the main Processor (s) field, type y.
    2. In the Enable on Survivable Processors (ESS and LSP) field, type all.
  5. Save the settings.