Configuring a relay service for Avaya Oceana port 443

Last Updated : Sep 28, 2020 |

About this task

Use this procedure to configure a relay service for Avaya Oceana® port 443.

Procedure

  1. Log on to the EMS web interface with administrator credentials.
  2. In the navigation pane, click Device Specific Settings > DMZ Services > Relay Services.
  3. On the Reverse Proxy tab, click Add.
  4. On the Add Reverse Proxy Profile page, do the following:
    1. In the Service Name field, type the reverse proxy profile name.

      For example, Oceana_Relay.

    2. Select the Enabled check box.
    3. In the Listen IP field, select the B1 external network and then select the B1 IP address used for the relay.
    4. In the Listen Port field, type the Avaya Oceana® secure port number 443.
    5. In the Listen Protocol field, click HTTPS.
    6. In the Listen TLS Profile field, select the server profile associated with the B1 interface.
    7. Leave the Listen Domain field blank.
    8. In the Connect IP field, select the internal A1 network and then select the A1 interface IP address used for the relay.
    9. In the Server Protocol field, click HTTPS.
    10. In the Server TLS Profile field, select the client profile you previously created for the internal A1 interface.
    11. In the Reverse Proxy Policy Profile field, select the reverse proxy policy profile with WebSockets enabled.
    12. In the Server Addresses and Whitelisted URL fields, type the address:port and URL combinations that are required for all applicable Avaya Oceana® servers/clusters. The Server Address is the IP address on the internal firewall that is allocated to each server/cluster.
    13. Click Finish.

      For information about mandatory whitelist configuration for Web Voice, see the table in Configure the reverse proxy for Web Voice and Web Video remote workers.