Changing cluster activity status for clusters in Data Center 2

Last Updated : Mar 13, 2023 |

Before you begin

Ensure that the OceanaMonitorService is installed on the clusters in Data Center 2.

Procedure

  1. Open the Oceana Manager page in the DR location by entering the following URL in your web browser:

    https://<DataCenter2_AvayaOceanaCluster1_FQDN>/services/OceanaMonitorService/manager.html?affinity=)

    Important:

    Create a bookmark of this URL in your web browser, so that you can open the Oceana Manager page even when System Manager is unavailable.

  2. Optional To open the Oceana Manager page through System Manager, do the following:
    1. On the System Manager web console, click Elements > Avaya Breeze® > Cluster Administration.
    2. On the Cluster Administration page, in the Service URL column for Avaya Oceana® Cluster 1, select Oceana Manager.
  3. Log in to Oceana Manager using an Admin account.
  4. On the Oceana Manager page, do the following:
    1. Verify that the status of the clusters is STANDBY.
    2. Click Set Cluster Group to Active.

      The cluster status changes to ACTIVE and all nodes are placed in the Accept New Service mode.

    3. Click OK on the confirmation message box.
    4. Wait for 5-10 minutes for the Oceana Manager page to display the updated status.
    5. Optional If the Oceana Manager page does not display the updated status after some time, click Refresh.
  5. In System Manager, select DR Cluster 1 drop-down menu and start Oceana Monitor.

    On Cluster 1, verify the PUs deployed and status is Intact including CSC. CSC PU is not deployed if the Oceana > CSC > AES > CM configuration is not done and validated. On Cluster 3, verify the PUs deployed and status is Intact including the Email PU. Verify that all nodes and clusters in the DR location are set to status Accepting. If any clusters or nodes are in Deny state, then re-do the above steps or manually set them to Accepting state using the Avaya Breeze® platform EM cluster overview page.