Configuring Avaya Aura® Session Border Controller networks for PSTN calls

Last Updated : Dec 07, 2020 |
Prolog information
Metadata
Keywords:
Avaya Oceana® exclusively supports on-premise Avaya Workspaces agents. It specifies that the agents must be on-site, behind the enterprise firewalls to log on to Avaya Workspaces and accept contacts. This procedure has a reference configuration where the PSTN customers make calls through the Session Border Controller trunk. Session Border Controller can be configured to allow external agents to access Avaya Oceana® from a remote location with Internet access, so that PSTN trunk calls are routed to the remote location agent through the Session Border Controller trunk.
  1. Log on to the EMS web interface with administrator credentials.
  2. In the navigation pane, click Device Specific SettingsNetwork ManagementInterfaces.
  3. On the Interfaces page, enable the following interfaces:
    ADDITIONAL INFORMATION:
    • A1 internal interface
    • B1 external interface
  4. On the Networks tab, configure the following networks:
    ADDITIONAL INFORMATION:
    • A1 internal network
    • B1 external network
  5. For external PSTN trunk access, assign the IP addresses to each network as follows:
    ADDITIONAL INFORMATION:
    The external IP address:
    • One IP address for the external network.
    Three internal IP address:
    • One IP address for the internal network.