Removing an Avaya Breeze platform server from the cluster

Last Updated : May 13, 2025 |

About this task

Use this procedure to remove an Avaya Breeze® platform server from the cluster. Note that this procedure is service impacting.

Remove Avaya Breeze® platform from all the clusters by removing the node marked as Idle, Standby, and Active for the cluster DB roles.

Procedure

  1. In System Manager, click Elements > Avaya Breeze®.
  2. In the navigation pane, click Cluster Administration.
  3. Select the targeted cluster and click Cluster State.
    1. Click Deny New Service.
    2. Click Continue when prompted.

    You can remove a server from the cluster only if all reachable nodes in the cluster are in the Deny New Service mode.

  4. Select the cluster, and click Edit.
  5. On the Cluster Editor page, click the Servers tab.
  6. In the Assigned Servers table, click the cross sign (x) next to the Name column.
    Note:

    The cluster database roles are assigned to the nodes within the cluster. You must remove clusters in the following order of states; Idle, Standby, and Active.

    The action of removing one or more servers from the cluster will restart the respective servers being removed from the cluster and the remaining servers in the cluster. Therefore, a service outage for this cluster should be expected.

  7. Click Commit to remove the server from the cluster you selected.
    Note:

    When you remove either the primary or the secondary Lookup server from a cluster, all the other servers in the cluster restart due to the configuration change. The system displays the Lookup server icon against the Lookup server on the Server Administration and Cluster Administration pages.

  8. Confirm the warnings presented.
  9. Wait until all services have been uninstalled successfully.