Configuring Avaya SBC for HA deployment using CLI

Last Updated : Apr 09, 2025 |

Before you begin

  • Ensure that the EMS server is functional and in the same network as Avaya SBC.

  • Ensure that both Avaya SBCs in the HA pair are installed and functional.

Procedure

  1. Log in to the primary Avaya SBC device.
  2. Edit the cli_sbce_config.sample file in the following folder: usr/local/ipcs/etc.
  3. Remove # from the cli_sbce_config.sample file and modify the respective parameters.
  4. Rename the cli_sbce_config.sample file to cli_sbce_config.

    Primary and secondary Avaya SBCs are added to the EMS server in a commissioned state.

    Note:

    Do not change any configurations for secondary Avaya SBC when configuring Avaya SBC for HA deployment using CLI.

  5. Check the cli_sbce_config file for successful configuration of Avaya SBC.

    If configuration is successful, the cli_sbce_config file is renamed to cli_sbce_config.commissioned.