Creating Internal Signaling Interface toward Call Server

Last Updated : Apr 26, 2023 |

Procedure

  1. Log in to the EMS web interface with administrator credentials.
  2. From the Device menu, click the SBC name to administer.
  3. In the left navigation pane, click Network & Flows > Signaling Interface.

    The left Application pane displays any existing signaling interfaces, and the Content pane displays the parameters of the selected signaling interface.

  4. In the right-corner of the Content pane, click Add.
  5. In the Add Signaling Interface window, add the following parameters:
    1. In the Name field, type a name for the internal signaling interface for the Avaya call server.
    2. From the IP Address field, select the IP address of the internal signaling interface.
    3. Configure the transport that you want to use.
      Note:

      • TLS is a secure protocol. To use TLS, you must have advanced session licenses and encryption licenses. In the TLS Port field, type the port number 5061.

      • If your call server uses a different protocol, type the appropriate port numbers in the TCP Port or UDP Port fields, as applicable.

      • The default port number for TCP and UDP is 5060.

      • Do not select the Enable Stun check box.

    4. Optional From the TLS Profile field, select the profile name for TLS.

      You can select a TLS profile only when you add a TLS port. If the TLS Port field is empty, the TLS Profile field is unavailable.

    5. Click Finish to save and exit.

      The system displays the new internal signaling interface.