The primary function of RTCP is to provide feedback on the quality of service (QoS) in media distribution by periodically sending statistical information to participants in a streaming multimedia session.
Procedure
Log in to the EMS web interface with administrator credentials.
From the Device menu, click the SBC name to administer.
In the navigation pane, click Network & Flows > Advanced Options
On the Advanced Options page, click the RTCP Monitoring tab.
Select the RTCP Monitoring Relay check box.
For relay settings, do not use an IP address that is already in use for SIP signaling and media bandwidth efficiency.
In the Node Type field, perform the following:
For DMZ Avaya SBC configuration, click DMZ.
For CORE Avaya SBC configuration, click Core.
For remote Avaya SBC configuration, click Remote.
In the Relay IP field, click None.
For Core Avaya SBC configuration, in the Relay IP field, click the IP address of the core Avaya SBC Internal IP1.
Note:
Core Avaya SBC Internal IP1 address is the address used to send RTCP traffic received from DMZ Avaya SBC and core phones towards a monitoring server.
For Core Avaya SBC configuration, in the Port field, type 5005.
For other configurations, do not change the values.
Click Save.
Next Steps
Configure application relay settings specific to the Core Avaya SBC configuration, remote worker configuration, or DMZ configuration.
