External signaling interface for the phone network.
Internal signaling interface for the Avaya call server.
IP Address
IP address of the internal or external signaling interface.
TCP Port
TCP port number. The default TCP port number is 5060.
UDP Port
UDP port number. The default UDP port number is 5060.
If your call server uses a different protocol, type the appropriate port numbers in the TCP Port /UDP Port fields, as applicable.
TLS Port
TLS port number. The default TLS port number is 5061.
Note:
Avaya recommends the use of TLS as this protocol is secured and supports presence.
Use the B1 interface as the external signaling interface.
To use Avaya one-X® Communicator for shared control, configure the shared control port in the internal signaling interface.
TLS Profile
Profile name of TLS.
You can also use third-party certificates.
If you specify the TLS port number, then you must select a TLS profile. Otherwise, leave this field blank.
Enable Shared Control
To use Avaya one-X® Communicator in the shared control mode, select the Enable Shared Control check box.
Shared Control Port
Shared control port number, for example, 5063.
For an internal firewall between Avaya SBC and Session Manager, you must open the Shared Control Port, for example, port 5063. The Shared Control port must not be used anywhere else on the Avaya SBC.
