Configuring the Avaya SBC IP addresses corresponding to the primary and secondary Session Managers

Last Updated : Apr 26, 2023 |

Procedure

  1. Log in to the EMS web interface with administrator credentials.
  2. From the Device menu, click the SBC name to administer.
  3. In the navigation pane, click Network & Flows > Network Management.

    Avaya SBC displays the Network Management page.

  4. Click Networks > Add.
  5. In the Add Network dialog box, type the following:

    • An External IP address for signaling towards endpoints to support the corresponding Session Manager.

    • An External IP address for configuration of the file or firmware download.

    • An internal IP address for signaling towards the corresponding Session Manager. This address can be reused for configuration file/firmware download.

  6. Select Interface Configuration and enable the interfaces.
  7. Repeat Step 2 to Step 5 for each Avaya SBC system.
  8. Click Finish.