Swapping a primary EMS server in an HA pair deployment

Last Updated : Jun 01, 2023 |

Before you begin

Confirm that the primary EMS server is non functional.

Confirm that both EMS devices have the same software version before you start the swap procedure.

The IP addresses of the old and the new EMS must be different.

Log in to the newly installed EMS web interface with the administrator credentials.
In the navigation pane, click Device Management.

The EMS server displays the Device Management screen in the content area.
On the Device Management page, click Devices tab.
When the state of the newly installed primary EMS becomes commissioned, click Swap Device.

Note:
The newly installed EMS server displays the Swap Device option only when there is no SBC device installed on the system.
Provide the IP address for the secondary EMS server.
Click Finish to complete the EMS swap.

Send Feedback