To start a new capture, run traceSBC without arguments and then press s: traceSBC
Filter a GSID
The s filter provides a way to trace the Avaya Global Session Identifier (GSID) header to filter SIP call traces. A GSID is in a form similar to 16169a40-cfe2-11ea-aeb9-00505694198d.
Note:
To use the GSID filter, the Extensions option in server interworking must be set to Avaya.
Filter SIP messages
To filter SIP messages from/to 1.1.1.1 and 2.2.2.2, enter the following command:
traceSBC -i "1.1.1.1|2.2.2.2”
Analyze an SSYNDI file
To analyze a previously captured SSYNDI file named my_sbc.log, enter the following command:
traceSBC my_sbc.log
Note:
Enable the debug log setting before performing the analysis. traceSBC does not display the logs if the debug log settings are not enabled. To enable SSYNDI debug logs, log on to the EMS and navigate to Monitoring & Logging > Debugging. Select the SBC device and then click the SSYNDI debug logscheckbox.
