Tagging a VLAN

Last Updated : Apr 26, 2023 |
Prolog information
Metadata
Keywords:
  1. Log in to the EMS web interface with administrator credentials.
  2. From the Device menu, click the SBC name to administer.
  3. In the navigation pane, click Network & Flows Network Management.
  4. On the Network Management page, click Interfaces tab.
  5. Click Add VLAN.
  6. On the Add VLAN page, do the following:
    1. In the Name field, type the VLAN name.
    2. In the Interface field, click the required interface.
    3. In the Tag field, type a tag number to identify the VLAN.
      ADDITIONAL INFORMATION:
      You can use tag numbers from 1 through 4094.
    4. Click Finish to save the changes.